FIRST USE INDICATIONS
LUBRICATE VERY WELL THE O-RING BEFORE USING IT FOR THE FIRST TIME
Apply the supplied lubricant only over all the surface of the o-ring. DO NOT apply it to the thread!
Do this operation again after 2-3 weeks of use.
HOW TO USE YOUR PASCAL BOX
EASY AND FAST
When you finish your game or when you get home, open your Pascal Box and insert the balls.
Pump in air to the level you want (you can adjust it to your liking).
And that’s it, the balls will start to recover their regulation pressure and the next day they will be as good as new.
When you are going to play, extract all the air using the tool plug or any other element, open it and play.
How to close correctly your Pascal Box
1 – Close the lid until you feel it has reached full contact with the top of the recipient
2 – Turn the lid an extra 1,5cm aprox. Use the vertical stripes as a reference (1,5cm = 1 and half stripes)
TIP: Once you have found the right sport, mark it with a marking pen both on lid and container and use it as a reference.
MAINTENANCE OF YOUR PASCAL BOX
SIMPLE CARE WILL ENSURE THAT YOUR PASCAL BOX REMAINS IN PERFECT CONDITION FOR MANY YEARS TO COME
Always keep the O-ring clean and lubricated.
In the first few weeks of using your Pascal Box, it is important to lubricate the O-ring every few days as it is absorbed quickly. After that, it is not necessary to lubricate it as often.
The gasket is the key element that makes our system totally airtight, because if there is even the slightest leak, the air would escape instead of entering the balls.
By pressing the tip to extract the air of the Pascal Box, it can be unscrew and cause an air leak.
This special part is designed for the specific function of screwing the tip inside of the inflation valve and eliminate air leaks through the valve.
It has not been designed to press the tip and extract the air although it can be used that purpose.
USE ONLY IN EXTREME CASES AND NEVER TO CLOSE IT!
Place the two small notches of the lid embracing the metal profile of a door or window.
As you push firmly the Pascal Box against the profile rotate the container gently in the counterclockwise direction.